Velboa vs Minky: How Our Silky Minky Began in 1996
Velboa and minky are both polyester knits with a cut pile. The difference you feel is mostly the fiber and the backing. Velboa is sold as a faux fur, with coarser fibers and a firmer knit back. Minky has finer fibers and a soft knit back that drapes. At EZ Fabric, that difference is also our history. In 1996, our founder Kayvan changed the fiber in the velboa we carried, and the result became our Silky Minky.
Most comparisons put the gap between velboa and minky down to pile length. In our experience, pile length is the smaller part of it. A long-pile minky and a short faux fur still feel different in the hand, because the fiber and the knit back are different. This is how we learned that, told in our own words. If you are new to the fabric itself, start with what minky fabric is.
Velboa vs minky: what is the difference?
Both fabrics are polyester knits with a cut pile, and neither frays. Where they part ways is in the hand.
| What you are comparing | Velboa | Minky (our Silky Minky) |
|---|---|---|
| Sold as | A faux fur | A minky |
| Fiber | Coarser | Finer and softer |
| Knit back | Firmer and stiffer | Soft, and drapes |
| How it feels | Smooth but firm | Silky and pliable |
| Pile height | Short; varies by mill | 3mm solid, 2.5mm print |
The fiber decides how soft the surface feels. The backing decides how the fabric drapes and how it sews. That is why minky is the usual choice for anything held close, such as blankets, loveys and baby accessories.
How our Silky Minky began
EZ Fabric opened in 1995 as a single store on the corner of 9th and Wall, in the heart of the Fabric District in downtown Los Angeles. Kayvan, our founder, carried faux fur, and velboa was one of the fabrics on the shelf.
A large customer making children's products asked us for something softer and more child-friendly than velboa. Kayvan went back to the fabric itself. He changed the fiber, made the base softer and more pliable, and developed a process that gives the fabric its silky, soft hand. In 1996, that fabric became our Silky Minky.
Silky Minky went on to be used in a fabric developed for Toys R Us.
We did not invent minky. Minky is a trade name for a whole category of plush polyester knits, and many mills make it. What we can tell you is where our own Silky Minky came from, and that is the story above.
From one store to five
The first store grew into five retail stores within a few blocks, on 9th Street, Wall Street and Maple Street. We are still in the Fabric District today. Our newest location will bring all of our companies together on Wall Street, the same street where we started. We’ll share visiting details once the space is open.
The same approach, again: Sharpei Snuggle®
Silky Minky set a pattern we still follow. Start from a fabric that is close, then rework it until it does the job.
Sharpei Snuggle® began as a faux fur with elastic that was too rough and too heavy for home interiors. Kayvan started reworking it in 2005, making it lighter and softer, and finished it in 2013. Today it is 90% polyester and 10% elastic, with a 12mm pile. The elastic is what gathers the surface into its soft bubbles.

The elastic in Sharpei Snuggle® gathers the pile into soft bubbles.
When Kayvan describes our Snuggle textures, he talks about the feel before the specs: buttery, cuddly and cozy to touch, with "a comfort feeling that warms your heart from inside." Our Snuggle textures start at a 5mm pile. For the full family and what each texture is for, see what Snuggle fabric is.
Printing: Korea first, then Los Angeles
For more than 20 years, our prints were made in Korea. In 2015, we started printing in Los Angeles. Our printed designs sit on the Silky Minky print base, which has a 2.5mm pile.

Our prints have been made in Los Angeles since 2015.
Silky Minky today
Silky Minky is still the base of much of what we make. The solid has a 3mm pile and the print base has a 2.5mm pile. Both are 100% polyester and 58/60 inches wide, a range the fabric arrives in. The solid is also made 90 inches wide.
Its short pile makes it our usual answer for a low-pile backing. Silky Minky behind an 8mm face such as Baby Whispy Snuggle gives a blanket two different hands without much bulk.
Kayvan's method for cutting it is the one we teach. Lay the fabric knit back facing up. Find the point on the blade that glides, and cut in one continuous motion, letting the blade part the pile rather than chop it.
Browse minky fabric in solids and dots, or see how Silky Minky compares with deeper textures in our guide to minky pile heights.
Frequently asked questions
What is the difference between velboa and minky?
Both are polyester knits with a cut pile. Velboa is sold as a faux fur, with coarser fibers and a firmer knit back. Minky has finer fibers and a soft knit back that drapes. Pile length differs too, but the fiber and the backing are what you feel.
Is velboa the same as minky?
No. They are close relatives, and both are plush polyester knits, but velboa feels firmer and minky feels softer and silkier. At EZ Fabric, our Silky Minky began in 1996 as a velboa reworked with a new fiber.
What is Silky Minky?
Silky Minky is EZ Fabric's own smooth minky, developed in Los Angeles in 1996 by our founder, Kayvan. The solid has a 3mm pile, the print base has a 2.5mm pile, and both are 100% polyester.
Did EZ Fabric invent minky?
No. Minky is a trade name for a whole category of plush polyester knits, made by many mills. EZ Fabric developed its own Silky Minky in 1996 and created its own Snuggle textures, including Sharpei Snuggle®.
When was EZ Fabric founded?
EZ Fabric was founded in 1995 by Kayvan, as a single store on the corner of 9th and Wall in the Fabric District of downtown Los Angeles. It grew to five retail stores on 9th Street, Wall Street and Maple Street.
What is Sharpei Snuggle® made of?
Sharpei Snuggle® is 90% polyester and 10% elastic, with a 12mm pile. The elastic gathers the surface into soft bubbles. Kayvan began reworking it from a heavier faux fur in 2005 and finished it in 2013.